CMS Model 50-E includes full alarm setup options with patient monitoring and data storage for download to PC for trending analysis with the included USB cable and included SPO2 Software.  Includes Lithium Ion Rechargeable Battery

CMS Model 50-E answers the physician, medical, home health care, sports and aviation markets demand for a lightweight, inexpensive monitor for measuring SPO₂ oxygen saturation and heart rate during physically active and high-altitude activities. The CMS Model 50-E finger pulse oximeter offers the user a greater ability to monitor these vital signs under motion and is less expensive than most available devices.

The CMS Model 50-E Finger Pulse Oximeter is very small & lightweight.  The CMS Model 50-E measures blood oxygen saturation (%SpO2) and pulse rate.

 

The CMS Model 50-E is based on CMS's uniquely patented algorithms that use dual 'see-through' sensor technology for the accurate measurement of blood oxygen saturation levels and heart pulse rate.

 

CMS Model 50-E finger pulse oximeter will NOT monitor SPO₂ during activity and movement.  You must stop the current activity and take the reading while stationary.  Movement will cause readings to be affected by artifact.

 

• Display mode:
• Type: 1.3" 65k Color TFT Display Resolution 160*128
• Parameters: SPO2, Pulse rate, Pleth Bar
• Information: SPO2, Pulse Rate,  Low Battery, Error
•  
• SPO2:
• Measurement Range: 35% - 99%
• Resolution: 1%
• Accuracy:  +- 2% in range 70% - 100%
• Method: Dual Wavelength LED
•  
• Heart (Pulse) Rate:
• Measurement Range: 30-250 BPM
• Resolution: 1 BPM
• Accuracy: +- 2 BPM or +- 2%
•  
• Alarm Settings:
• SPO2 Low Limit
• Pulse Rate High and Low Limits
• Heart Rate
• Sensor Off
• Modes: Audible, Visual, Information
•  
• Environmental:
• Operating Temp: 0 - 50 Centigrade
• Storage Temp: -10 - 60 Centigrade
• Operating Humidity: 15% - 95% RH
• Storage Humidity: 10% - 95% RH
•  
• Power Requirements: Built-in Rechargeable Lithium Battery
•  
• Batteryconsumption: Can be continuously used as long as 24 hours
•  
• Dimension: 57mm (2.2”) X 32mm (1.2”) X 30mm (1.1”)

Warranty

Hardware: This guarantees that the hardware will be free of defects in material and workmanship under normal use, or it will be replaced by Southeastern Medical Supply or Southeastern Medical Supply’s designated representative.

Software: This guarantees that the physical media are free from defects, or they will be replaced by Southeastern Medical Supply. Also, the warranty guarantees that the software generally conforms to the published specifications for the product. Software is provided "as is," and in no event does Southeastern Medical Supply warrant that the software can be easily operated by the user.

Return Policy

• Because this is a Class II medical device there is no trial period for this product purchased from Southeastern Medical Supply. Defective hardware will be replaced by Southeastern Medical Supply (or its designated representative); or, upon verification that the hardware is defective, a refund may be applied. Unopened products returned to Southeastern Medical Supply are subject to a 20% restocking fee.

• Defective software media will be replaced or the customer will be directed to a download location to obtain the software. A customer who is unable to operate the software is not eligible for a refund.