The Nonin RespSense capnograph allows healthcare professionals to non-invasively monitor capnometry on either intubated or spontaneously breathing patients. When measuring EtCO2, the patient is attached to the monitor by a sample line that can be an airway adapter for an endotracheal tube, a nasal cannula, or a nasal cannula with supplemental oxygen delivery. A variety of sample lines can be used and connected to a specially designed moisture trap, which is easily snapped into the slot on the left side of the monitor. The sampling lines or cannulas can be used with or without Nafion� tubing.
Nonin's RespSense has visual and audible alarms when limit readings are outside the predefined limits. Limits can easily be adjusted using the touch panel display. The operator can pause or resume the alarm by pressing the Audible Alarm Pause/Resume button.
The RespSense capmograph has a touch panel display where settings and adjustments are made. The touch panel display also shows battery status and fault messages. The only buttons on the monitor,
ON/OFF and Audible Alarm Pause/Resume, are located on the upper right corner of the front panel. Next to these buttons there is a small indicator that turns green when the monitor is connected to a power outlet. RespSense operates on battery power for approximately 8 hours.
Accessories Included: Three (3) Filters, Three (3) Adult CO2 Sampling Nasal Cannulas, One (1) CO2 Sample Line, One (1) Straight T-Connector; One (1) Sens PS-NA Battery Charger, One (1) Protective Carrying Case, One (1) RespSense Operator's Manual