 |
 |
 |
|
The General Meditech GED patient monitor is a quality built, affordable, full function vital signs device suitable for pediatric, child and neonatal patients. It displays patient data, waveforms, stores patient data in a trend database, and generates alarms and recordings.
The Multi-Parameter Patient Monitor can be used to display the major parameters such as electrocardiogram (ECG), body temperature (TEMP), impedance respiration (RESP), oxygen saturation (SpO2), invasive blood pressure (IBP), noninvasive blood pressure (NIBP) and CO2 (EtCO2 and FiCO2). It integrates the parameter measurement, display and record export as a whole, which forms a compact and portable monitor.
The monitor is capable of monitoring the following parameters:Electrocardiogram (ECG): heart rate (HR), 7 (or 3) leads ECG waveforms and ST segment analysis. Noninvasive blood pressure (NIBP): systolic pressure (SYS), diastolic pressure (DIA) and mean arterial pressure (MAP).Body temperature (TEMP): temperature of channel 1 (T1), temperature of channel 2 (T2) and temperature difference between the two channels, Pulse oxygen saturation (SpO2): SpO2, pulse rate (PR) and SpO2 plethysmogram. Respiration: respiration rate (RR) and respiration (impedance respiration or nasal tube respiration) waveform.Invasive blood pressure (IBP): 2 channels of IBP waveforms, systolic pressure (SYS), diastolic pressure (DIA) and mean pressure (MEAN). Carbon dioxide (CO2): end-tidal carbon dioxide (EtCO2), fractional inspiratory carbon dioxide (FiCO2) and CO2 waveform.
Standard configuration: ECG, HR, PR, SpO2, ST analysis, RESP*2 (RA-LL impedance and nasal cavity), NIBP (with venous punch), TEMP*2(surface and rectal type), Drug dose calculation. Optional configuration: Wireless connection, Recorder and ETCO2, 2-IBP
Special order item, built to your specification
General Meditech G3D Technical Specifications ECG
Input: 3 wires /5 wires ECG cable
Lead section: I, II, III/I, II, III, aVR, aVL, aVF, V
Gain(mm/mV): 1/4, 1/2, 1, 2, 4
Sweep speed(mm/sec): 6.25, 12.5, 25, 50
Heart rate range: 15-300 BPM
Heart rate accuracy: � 1 %
ST segment deviation analysis NIBP (Non-invasive blood pressure)
Measurement type: adult, pediatric, neonatal
Measurement range:
Systolic 4.0 � 37.0 kPa
Diastolic 1.3- 33.0 kPa
Mean 2.6-35.0 kPa
Accuracy: � 0.4 kPa or 5 %
Resolution: 0.1 kPa
Tourniquet function Temperature (surface and rectal)
Measurement range: 25.0-45.0 �C
Accuracy: � 0.1 �C
Resolution: 0. 1 �C (I, II, III selectable impedance and nasal cavity)
response time: < 3 min. Respiration Rate
Measurement range: 0-120 BPM
Accuracy: � 1 BPM or 5 %
Resolution: 1 BPM Pulse Rate
Pulse measurement range: 30- 250BPM
Resolution: 1 BPM Sp02 measurement range: 0-100 %
Resolution: 1 %
Accuracy: � 2 % IBP(lnvasive blood pressure) (Option)
Measurement range: -1.3~40kPa (-10~300mmHg)
Channel: 2 channels
Transducer sensitivity: 5MV/V/mmHg Unit display: KPa or mmHg selectable
ETCO2 (main/side stream type) (Option) -Plug&Play
Measurement range: 0-150 mmHg
(Barometric pressure supplied by Host)
Accuracy: 0-40 mmHg � 2mmHg
41-70 mmHg +5% of reading
71-100 mmHg �8% of reading 101-150mmHg �10% of reading
Above 80 breath per minute�12% of reading
Sample rate: 50ml/min
Response time: < 3 seconds-includes transport time and rise time Cardiac Output (Option)\ Method: thermodilution Measurement range:
CO: 0.1-20.0 L/min TB: 23-43 �C TI: 0-27 �C Resolution: CO: 0. 1 L/min Tl: 0.1 �C TB: 0.1 �C Accuracy: CO: � 0. 2 L/min or �5%
TB: � 0. 2 �C
TI: + 0.2 �C Parameter output: Cardiac output Hemodynamics calculation Power requirements Input: 100-240 VAC, 50/60HZ Safety standard: IEC 60601-1 Quality System: ISO13485-2003 Product Certificate: CE, FDA
The G3 Multi-Parameter Patient Monitor is warranted by the manufacturer for 1.5 years from the date of the purchase. Accessories such as the SpO2 sensor, blood pressure cuff, ECG cable and body temperature sensor are warranted for 1 year. All consumable items are excluded from the scope of this warranty. The following situations void the scope of the warranty: - The serial number of the monitor was ripped off or unreadable; or - The monitor was damaged due to improper connection with other equipment; or - The monitor was damaged due to accident; or - The user modified the monitor without GMI�s written authorization.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Display: 8.4" color TFT LCD screen with maximum 8-waveform display. - Battery: Rechargeable high-energy built-in battery - Advanced streamline outline design, portable, compact, lightweight - Operating menu with multi-language interface selection: English, Spanish, Portuguese, Chinese, French, Arabic, Russian, etc. - Easy operation with user friendly menu structure design and rotary dial - Against electrosurgical interference and defibrillation and no need to disconnect the monitor from the patient in process of defibrillating. - WAN communication function to network with central monitoring system and make long-distance monitoring, diagnosis, maintenance and software upgrade possible -Optional built-in wireless networking function - Support external printer to record graph and trend - Intelligent audio and visual comprehensive alarm - In-hospital applications include emergency pre-and post-operative care, ambulatory surgery, intermediate care/step down units, labor and delivery, and hospital-based special procedure areas. - Suitable for use in physicians� offices, clinics, outpatient surgical centers, extended care facilities and other patient care areas, which of require affordable monitoring Standard configuration: ECG, HR, PR, SpO2, ST analysis, RESP*2 (RA-LL impedance and nasal cavity), NIBP (with venous punch), TEMP*2(surface and rectal type), Drug dose calculation.
|
|
|
|
|
|
|