 |
 |
 |
|
Note : This is the Base unit with the SPO2 Module
Provides professionals with a modular multi-platform diagnostic device. This design allows for customization that aligns your clinical needs with a tailored spend approach :
Base Unit
The base unit provides non-invasive Blood pressure using the oscillometric method. Pulse rate and MAP are also displayed in about 30 seconds. Works with cuff size from child to thigh. Comes equipped with adult and large adult cuffs standard. Other cuff sizes available.
Manual mode allows for stethoscope measurement using the auscultatory method.
Optional Modules and Features :
The ADVIEW is completely modular. You can purchase the unit fully configured or upgrade in your office later at any time. No tools are needed. The "connect and go" capability is effortless.
There are three mounting platforms - wall, tabletop or mobile.
Temperature :
A temperature module special technology provides an oralor axillary temerature in about 10 seconds. Easily switchable scale reads either Cenntigrade or Fahrenheit. Has a built in color coded storage well for the probe and box of 20 disposable probe covers. Optional color coded rectal module available as well.
Pulse Oximetry :
Module features a SPO2 module that features industry leading Nellcor compatible tehnology for accurate readings in about 10 seconds. Complete with Nellcor compatible probe with a 6 foot cord. Displays pulse rate and signal strength during readings. Optional pediatric / multisite sensor available.
EMR Ready Option:
Long range (30 meter) Bluetooth connectivity to your EMR system can be established with this option.
Patient population - Adult and pediatric patients (age 3 and above).
Method of measurement - Oscillometric
Initial inflation pressure - 160mmHg +/- 20mmHg
Blood pressure range (mmHg) - 60 < Systolic BP < 270, 30 < Diastolic BP < 170
Blood pressure accuracy - Measurements determined with this device are equivalent to those obtained by a trained observer using the cuff/stethoscope auscultation method, within the limits prescribed by the American National Standard, Electronic or automated sphygmomanometers.
Blood pressure determination time - 35-40 seconds typical for Adult cuff
Heart rate range 30-200 bpm +/- 2% or +/- 3 bpm, whichever is greater
Temperature range 86°F (30.0°C) – 109.4°F (43.0°C)
Temperature accuracy - +/- 0.2°F (+/-0.1°C)
Functional oxygen saturation range - 40-100%
Functional oxygen saturation accuracy 70-100% +/- 2 digits
(Note: because pulse oximeter equipment measurements are statistically distributed, only about two-thirds of pulse oximeter equipment measurements can be expected to fall within ± 2 digits of the value measured by a CO-oximeter.)
Operating conditions - 10°C (50°F) to 40°C (104°F) Less than 90% RH
Storage conditions -20°C (-4°F) to 55°C (131°F) Less than 90% RH
Power
External power supply for non-battery version: Globtek model: GTM21089-1506-T3 (SunTech part number: 19-0013-00)
External power supply for Battery version, rechargeable by Globtek model: GTM21089-1509-T3 (SunTech part number 19-0014-00)
Calibration Check once per year for BP and Temperature
Safety systems
Independent hardware over-pressure circuit and redundant software overpressure algorithm to limit cuff pressure to less than 330 mmHg.
Independent hardware timing circuit and redundant software timer algorithm to limit the duration of a blood pressure cycle to less than
180 seconds.
Dimensions
Length = 5.5 inches, Height = 11.5 inches, Width = 3.8 inches; Length =14.0 cm, Height = 29.2 cm, Width = 9.7 cm
Standards
UL60601-1, CAN/CSA C22.2 601-1
IEC 60601-1, IEC 60601-1-2 (EMC), IEC 60601-1-4, ISO 9919, AAMI SP10:2002, ASTM E 1112, EN 12470-3
Meets “Non-invasive Sphygmomanometers — General Requirements & Supplementary Requirements for Electro-Mechanical BP Measuring Systems”, EN 1060-1, EN 1060-3
Classification
Protection against electric shock: Class II (for non-battery version), Internally Powered Equipment (for battery version);
Applied parts: Type BF; Mode of operation: Continuous
ADC, American Diagnostic Corporation, a world leader in core diagnostic products for over a quarter of a century, partnered with Suntech Medical, the premier developer of innvative blood pressure technology to create the first truly modular diagnostic station that you can customize to meet your requirements.
|
|
|
 |
|
 |
|
|
|
*Most Items, Look for the Truck:
